Customers Scooters
email your pictures to jc@fastcushman.com
Masterminds at work- beware of these two! Paul and Gerry tinkering.
Bob Chatiney from Weatherford, Ok with his super eagle. Bob says he has had this black beauty for over 10 years, running a mikuni stage I.
Cool-Hot scooter with a Mikuni kit and flamed seat. This
one belongs to John S. Birtciel of
Amarillo, TX
Jim Sellers of Broken Arrow, Ok. before and after 1959
Allstate scooter.
The scooter has been completely powder coated "Crimson Red", with the
exception of the fiberglass rear fender and gas tank. The 4.8hp engine has
been bored .030 over and equipped with high performance kits from
Fastcushman; Such as, High Performance head gasket, Stage 1 Mikuni carb and
the Super Spark Ignition kit. Unless the 8hp boys have made mods to their
engine, better look over their shoulder for one "fast moving" little
red
Allstate coming up.
Jason,
Larry (Las Vegas, NV) has asked me to send you pictures of him with his '59 Eagle and his latest addition - a Cushman tattoo. I'd say he's somewhat obsessed with Cushman.'59 Eagle, cast iron 3/16th stroker, left hand carb, nitrous oxide system.
You don't want to walk behind this machine when it's running, it can KICK!
Make sure you let people know that if they want to know
anything about stroker motors, get in touch with Paul Taylor.
Ride Safe
Karen & MzPiggy
Sams Step-Thru
Running a stage I and other goodies. Notice a small modification (notch) was required to install the carb. Several people ask how far this kit will stick out--look closely at the first picture and you will see it just sticks out of the engine compartment, and it is centered on the scooter. Thanks for the pictures Sam!
Bill's over-powered package car. 8hp block with big valves, cnc head, mongoose cam, stage II down pipe kit, and porting. Soon to be placed on a eagle.
Rick Wilson's 1961 Cushman Eagle
Bill Lankford of Texas on his reliable 1959 custom Eagle.
Nick Dillon's 1960 Eagle, in California
My 1957 Eagle going back together....The Eagle is a hit!
